Doors break on both the panel and the temperature and. Figured the doors inside are busted so got new ones. It turns the barrel inside the housing.
Remove the actuator and operate the drive with a. Ware is the actuator location? Looking at a wiring diagram, i know red is.
Pulled actuator off and levers for both doors spin completey around. Any actuator dated prior to 365/15 can be suspect to internal shorting issues. Start searching to find a dealer near you. The actuator is on the left.
When i plug the actuator in, red stays at solid 13v (truck is running) orange has low voltage around 10 and black now has a solid 13v. Peterbilt 579 copyright © lang mekra north america 2014 page 2 of 29 revised: There is 2 on the passenger side floor. All 5 actuators are the same part.
By submitting your contact details, you agree to receive. Lots of time the barrel gets jammed when some particles. First remove the actuators and then run the air control from the hvac knobs on the dash and see if they are moving. Access the blend door and see if either something got lodged into the blend door and heater box through the vents or if the door linkage, etc are still in tact and have not broken.
Sign up to receive exclusive updates and more via email from peterbilt motors company. What i need to know is procedure to replace these doors. The drum assembly is the large circled part. Have you checked the fuse for the temperature actuator in your 2022 peterbilt 579?
The actuator on the very left is the one that will be responsible for defrost and other positions. Take the lower dash pieces in front of drivers seat, and.